Naucrates 88
88' (26.97m) Ocean King
LOA: 88' 6" (26.97m)
Beam: 26' 2" (7.98m)
Draft:
Speed:
Cruising 10 knots
Maximum 12 knots
Location: Italy
Year: Mfg-2020
Model-2019
Builder: Ocean King
Type:
Expedition Yacht
Price: approx. ($6,964,025 USD)
6 150 000 € EUR
Additional Specifications For Naucrates 88:
LOA: 88' 6" (26.97m)
Beam: 26' 2" (7.98m)
Min Draft: 8' 2" (2.49m)
Max Draft:
Hull Material: Steel
Hull Config: Chined Hull
Hull Designer: Innave
Deck Material: Steel
Tonnage: 252
Range:
Int Designer: Design Studio Green Yachts
Ext Designer: Design Studio Green Yachts
Fuel Capacity: 10,450 g (39,558 l)
Water Capacity: 2,930 g (11,091 l)
Holding Tank: 400 g (1,514 l)
Flag: TBA
Location: Italy
Price: approx. ($6,964,025 USD)
6 150 000 € EUR
Year: Mfg-2020 Model-2019
Builder: Ocean King
Model: Naucrates 88
Type:
Expedition Yacht
Top:
Speed:
Cruising 10 knots
Max 12 knots
Engines: 588 HP, Twin, 2020, Inboard, Diesel, D2842 LE412, MAN
Staterooms: 3
Sleeps: 8
Heads: 3
Crew Quarters: 2
Crew Berths:
Captain Cabin: No
Classifications:
MCA: None ISM: None
Hull Construction

Double bottom steel hull with integral tanks. All the tanks shall be structural. The double bottom shall be extended from the collision bulkhead to the transom, excluding the area reserved for the engine room. Proper holes shall be drilled on the Keelsons, floor plates and currents to enable the easy drainage of liquids. The tanks included in the double bottom, shall be provided with a proper number of manholes for inspection and cleaning. All the tanks shall have drainages. The fresh water tanks shall be treated with products suitable for the conversion of running water. The plating, built up profiles and standard profiles are to R.I.N.A. specifications S275 JR (Grade A) or better. The workmanship and welding is according to the highest standards of shipbuilding and according to R.I.N.A. regulations. Topsides, decks and transom shall typically be fair and smooth. Sheer, deck lines and rub rails executed fair and without bumps. All welding work carried out by qualified welders. Where appropriate, the welds will be ground smooth. Steel Hull Plating S 275 JR Grade A factory blasted and epoxy coated, thickness: Bottom Plate = 5/10” - 4/10” (12-10-9 mm) and Side Plating = 5/16” (8-7-6 mm).

  • Keel: Steel S 275 JR Grade A thickness 8/10” (20 mm).
  • Collision bulkhead with water-tight bilges and bulkheads throughout the boat.
  • Anchor placement in two hawseholes semi-recessed type realized in Stainless steel AISI 316.
  • 2 propellers without nozzle of 1280 mm of diameter, five blades.
  • 2 Rudder Flanged to the shaft “NACA” profile
  • Stainless steel bulwark caps,
  • SS solid rod lining at all scuppers and hawse holes and 4” SS pipe rub rail.
  • Stainless steel ports in hull sides with deadlights.
  • Interior partition walls are fully insulated up to 31∕4” for maximum sound proofing.
  • All accommodations thermally insulated, including the hull.
  • All house doors are water resistant and lockable.

Superstructure

The superstructure built in Light alloy type H 5083 weld in accordance with high standard R.I.N.A. The workmanship and welding shall be typically fair and smooth. Deck lines executed without bumps. All welding done by experienced welders. All external welds will be ground smooth.

  • Aluminum 5083 type for Superstructure: plate: 1/4” (6-5 mm).
  • Plating: Light alloy type 5083 thickness: 6mm.
  • Built up profiles and stiffeners: As plating.
  • Mast: It shall be realized in welded light alloy and bolted to the bridge with support for radars, antennas, lights.
  • Light alloy 5083 Superstructure painted with marine paint
Engine Room

Two MAN D2842 LE 412 rated @ 1800 rpm 588 Kw continuous commercial duty marine diesel engines, four stroke, 12 cylinder V, turbocharged, intercooler with mechanically controlled fuel injection.

Two Marine Gearboxes Reintjes WAF 364 reducer i=4,053

 

Engine Data:

  • Bore and Stroke: 128 mm x 142 mm
  • Cylinder displacement: 21,916 liters
  • Weight: 1.790 Kg

 

Rating Level:

  • 760 Hp (588 KW) at 1.800 rpm
  • Fuel consumption at maximum power: 148 l/hr each
  • Typical 20,000 hours to major engine service or rebuild
  • Soft engine mounts with anti vibration coupling

 

Engine room engine gauges:

Insulated engine room with hole plating coating for great professional look, easy maintenance and cleaning.

  • 1 Main Switchboard with Touch Screen monitor.
  • 1 door with steering lock from engine room to stern garage.
  • 1 aluminum door with steering lock from main deck to engine room
  • 2 Marinox Shaft Lines 105 mm Diam.
  • 2 Five (5) blades bronze propellers diameter: 50” (128 cm) without nozzle
  • Watertight access doors
  • Polished stainless steel hand rails
  • 2 axial fans 400 Volts 0.75 Kw at 1400 rpm with automatic fire dampers
  • AC and DC lighting
  • Aluminum non-slip flooring
  • Insulation and Soundproofing:

 

Engine Room Insulation and Soundproofing:

The base material shall be mineral wool with a density of 50 Kg/m3 and a variable thickness ranging from 50 to 100 mm, according to the different needs. The soundproofing system shall mainly consist in two types of treatment: either a sandwich of two layers of low-density mineral with a sheet copper layer in between, or a simple layer of mineral wool, according to the areas to be protected as well as the needs. In both cases the final overlapping of a holed aluminum sheet shall be foreseen. The insulating material shall be connected to the walls with metal nails either welded or glued to the structure.

 

Living Areas Insulation and Soundproofing:

The base material shall be mineral wool with a variable density ranging from 15 to 50 Kg/m3 and a variable thickness ranging from 25 to 60 mm, according to the different needs. The insulating material shall be connected to the walls with metal nails either welded or glued to the structure.

 

Noise Levels:

Acoustic and noise anti vibration insulation in engine room, all interior bulkheads, main & lower deck floors. Double acoustic bulkheads between the engine room and accommodations. Maximum acceptable sound levels throughout vessel shall be determined with the vessel operating at maximum continuous rated speeds with all specified equipment in operation. Estimated sound levels at Cruise speed at 10 knots with all normal services and air conditioning not in operation are as follows.

 

Location:

Main Saloon <60 dB
Pilot House <58 dB

Owner Suite <62 dB

Guest Staterooms <62 dB

Systems

Fuel System:

Fueling station on main deck (one Stbd one Port) w/overflow tank, sight gauges and spill retention system. Large diameter piping system vents in funnels in order to refuel Diesel in few hours. Fuel transfer system from tanks (six) to Day tanks (two) with pre-plumbed professional 400 V - 50 Hz pump ‘Gianneschi’ mod. CP30 0.37 Kw at 1450 rpm. All the valves for transfer operation are with electrical actuators and will be controlled from the Automation plant trough touch-screen monitor in Main Switchboard in engine room and/or in pilothouse. The fuel transfer from tanks to day tanks shall take place through a centrifugal purifier with water separator Alfa-Laval or Westfalia mod. OTC 3 capacity 400 l/h. Fuel lines are in carbon steel with weld piping. Dual Racor filter/water separators 500 micron from day tanks to main engines with manifold. Racor filter/water separators 500 micron at generators. Fuel tanks (eight) all integral to hull, and two (2) day tanks. Liquid level indicators on all fuel tanks, as well as site gauges on day tanks brand VEGA. Main Engines Cooling and Exhaust System. Sea water cooling open circuit for Engines and Generators Riser type with heat exchanger brand Co.Fe.Me or equivalent. Dual Sea chests with professional manifold. The sea inlets shall be realized by using a steel pipe with a proper thickness, welded to the bottom plating and flanged to the sea cock. Filters shall be in stainless steel. The pipes shall be in Aisi 304 steel and galvanized steel.

 

Bilge Pumping System:

A complete professional bilge pumping system is installed with two professional bilge pumps 400 V, 50Hz 4 Kw each at 1450 rpm with a capacity of 20 M3/h with automatic alarms for high water in bilge and water sensor. Each pump will have inline check valves and auto/off/manual selection switch. All pumps will be also used for fire-fighting use. All pipes shall be in galvanized steel. The bilge tank shall have the capacity as foreseen by the regulations and a disembarkment line ashore in compliance with MARPOL regulations.

 

Optional:

On request a RWO depuration system for bilge water is installed.

 

Fresh Water System:

One complete water pressure system will be installed, with integrated steel tank, two professional pre-plumbed JET pumps, 400 V, 50Hz 2 Kw at 1450 rpm brand ‘Gianneschi’ with pressure tank, piping, valves, fittings, pressure gauge and pressure control. On request, will be supplied a second JET pump for pressure wash down decks with some taps with quick coupling. On swim platform will be installed one faucet with cold and hot water. The pump(s) are connected to one pressure manifold and are laid out so that they can serve the system together or separately. The pump suction lines are connected to the crossover line between the tanks to allow the tanks to be drawn together or separately.

All pipes shall be in stainless steel AISI 316, press-fitting type.  2 Electric hot water heater 100 l each with hot water professional pumps 400 V, 50Hz, 3Kw. Liquid level indicators on all water tanks.

Optional: on request
One 500 Lt/h water making system IDROMAR or TECNICOMAR.

 

Optional:  On request
One sand filter and one UVA sterilization system is installed on the pipe line .

 

Black water System:

One tank for Black water with a capacity of 15,00 liter, with shore pump out capability, and pre-plumbed pump for overboard discharge capability. WC discharges shall be collected in appropriate tank provided with a breather at the shaft top, with a flexible pipe. All pipes and accessories shall be realized in Stainless Steel AISI 316 in Engine room and in PE-HD outside Engine Room.

 

Grey water System:

One tank for grey water with a capacity of 1,500 liters. The gray waters of the hygiene rooms, of the kitchen and food stores, and laundry shall discharge due to gravity into the collection tank. The gray waters shall be directly discharged outboard. All pipes and accessories shall be realized in DRAIN 316.

 

Windlass & Winches:

  • One professional horizontal anchors windlass 400 Volts 7.5 Kw @ 1450 rpm with chain gypsy for 19 mm chain brand: Romagnoli or similar.
  • Two Stern 400 Volts 3.5 Kw with inverter professional winches brand: Romagnoli or similar.

 

Bow Thruster:

  • One professional Bow Thruster 40 Kw 400V @ 1450 rpm with joystick control unit on the pilothouse brand: Romagnoli or Similar.

 

Optional :

  • Stern Thrusters. Twin professional Stern Thrusters 400 Volts 22 Kw @ 1450 rpm each with joystick control unit on the pilothouse brand: Romagnoli models: BTX 350 CC or similar.
  • Tender Crane. One professional fully foldable telescopic knuckle type crane with articulated boom model AK10 with capacity 1750 Kg, brand: HS MARINE with Remote controller.
  • Stabilizer system. On board will be installed One Rodriguez system ESF-2200 Electric, Active and Zero-Speed stabilizer fins or similar brand.

 

Hydraulic Gangways:

  • One stern swimming ladder brand Besenzoni model SI 408 or similar brand

 

Optional:

  • On request one telescopic hydraulic gangways brand Besenzoni model PI 383 or similar brand.

 

Air Conditioning and Heating System:

The plant consist in 1 water cooler block, with heat pump. The Fan coils shall be placed in the insulated rooms for water/air treatment. CONDARIA brand or similar with 240.000 BTU/h capacity with U.T.A. only for lower deck. In general the best thermal hygrometric conditions shall be guaranteed in hot and cold waters. The system is rated for Mediterranean use. Arctic or tropical conditions will be quoted on request.

 

Compressed Air Plant:

A compressed air power station shall be foreseen and planed in A.M., which will provide low pressure air ( about 7 bar) for any automatism and board services. For such a plant an air cooled E/compressor, an air dehydrator filter and a tank with a capacity of 100 lt at 7 bar pressure.

 

Sea Water Fire Fighting System:

In the yacht will be installed one ‘ Self Protection’ system with two emergency professional pumps 400 Volts 3 phases, 4 Kw at 20 mt with direct connection to Sea Chest or through appropriate selection valve through bilge tank and one diesel pump that can operate also in electrical blackout. On board will be 4 fire-fighting stations with hydrants and hoses UNI45 type.

 

Fire Detection System:

In the yacht will be installed one smoke detection in some rooms and one control detection system in Pilot House. Brand Autronica or similar.

 

Engine Room Fire Fighting System:

In the yacht will be installed one ‘AEROSOL’ fire-fighting system’ allocated in appropriate boxes direct in engine room.  1 remote station with emergency control for closing diesel supply and axial-fan in engine room. 
Electrical Plant

All electrical equipment located so as to be readily accessible for maintenance, repair or removal and is of a type proven satisfactory for marine use. All electrical equipment and wiring tested in accordance with applicable CE rules. Any and all drawings and schematics relevant to the system shall be furnished to the vessel owner. The installation shall be splash proof in the interior and totally water proof at the exterior. All cables will be numbered and marked on the drawings. All the low tension cables and for radio frequencies are laid separately from those at 220/400 V, when it is not possible, the cables with the same degree of insulation are used for diesel generators. An earth plate 3x400 Volts/50 Hz shall be installed and connected to an isolation transformer.

 

Optional:

Automation Plant. A state of the art Automation Plant will be installed on request on board, Brand BOENING with touch screen panel on Main Switch Board and LCD monitor in pilothouse. This Plant will control: Axial fans in engine room, Navigation lights, Bilge system, Fuel transfer, Fire-Fighting system pumps, Diesel plant, Tank liquid level gauges, Power Distribution, Generators parallel, Shore power, main Pumps, Cameras, Search lights, Wipers, Horn, Rudders.

 

Optional:

Navigation Plant. A state of the art Automation Plant will be installed on board, Brand BOENING with 3 x 19” touch screen monitors  and 2 x 15” touch screen monitors in pilothouse. This integrated bridge, control of many system and integrated with FURUNO navigation technology (GPS, Radars, Autopilot, Chart Plotters etc.) grant a professional bridge look.

 

Diesel Generators:

  • Two 400 V, 50 Hz Kohler 50 EFOZ - 50 kW, 55 kVA generators, in sound shield, with heat exchanger cooling, wet exhaust and exhaust separator AC/DC distribution panels in utility room, main deck and pilothouse .
  • Two (2) 150 amp engine driven alternators
  • Aft shore power hook-up, with 125 amp 100’ Glendinning cable with connector 400 Volts 3 phases with connection at the board transformer for constant voltage and isolation assurance.

The Main switchboard with frontal access, Touch Screen monitor, constructed in steel or painted aluminum will be positioned in the engine room.

 

Optional:

On request can be provided also an automatic parallel with the shore power in order to have not blackout during the change of power from generators to shore power and vice versa.

 

  • Charger: Mastervolt 400 Volts, 100 Amp for service batteries 24 Volts.
  • Charger: Mastervolt 400 Volts, 100 Amp for emergency batteries 24 Volts.
  • Charger: Mastervolt 220 Volts, 75 Amp for engines starter batteries.

 

Batteries:

  • Two (2) sets of batteries, Mastervolt 24 Volts with a capacity of 270 Amps. For services
  • Two (2) sets of batteries, Mastervolt 24 Volts with a capacity of 360 Amps. For emergency.
  • Four (4) Set of batteries, Mastervolt 12 Volts with capacity of 370 Amps. For engines starter
  • Masterbus and Mastershut for monitoring batteries and charger status.

Distribution Circuit:

  • 400 V 50 Hz AC Three-phase circuit
  • 220 V 50 Hz AC mono phase circuit
  • 24 V DC Emergency circuit

 

Ship Name, Yard Plate and Yard Brand:

  • The Ship name realized in painting aluminum letters will be installed on Stern.
  • On two Funnels will be installed the Yard Logo realized in Inox plate with backlit LED lights.
  • On Valves, pumps and accessories will apply special identifying plates.
  • On doors will apply appropriate hazardous labels.
  • Inox Yard plate will apply on board.

Optional:

  • On request will be installed a Ship name realized in Inox plate with LED lights.
Navigation and Communication Equipment
  • 3 Monitor BONING 19” touch screens for navigation
  • 1 IPAD-IPHONE Interface
  • 1 Bronze Eco Sounder FURUNO 1 Kw B258
  • 1 RADAR ARPA FURUNO 6 Kw with 4 ft Open array 64 Nm
  • 1 RADAR FURUNO UHD 4 Kw with 4 ft Open array 48 Nm
  • 1 FURUNO MAXSEA Professional navigation software ECS
  • 1 FURUNO SATELLITE COMPASS Imo Version SC-50
  • 1 Hub 101 Ethernet FURUNO
  • 1 GPS FURUNO GP-33
  • 1 Autopilot FURUNO NAVPILOT 700-E2A
  • 1 AIRMAR WIND/WEATHER STATION NMEA 2000
  • 1 AIS Trasponder FURUNO FA-50 CLASS B
  • 2 VHF FURUNO FM-4721 DSC
  • 1 Search light 24 Volts
  • 1 Magnetic Compass
  • 2 Controls for Main Engines
  • 1 Control for bow thruster
  • 2 Controls for generators
  • 1 LCD Control for Wipers
  • 1 Navigation Lights

Paintwork

Painting will be ‘International Marine Paint’. All painted surfaces will be free of dust, runs and orange peel.

 

System of cathodic protection: The system consists in a series of zincs placed in the hull, rudder and propeller cuff.

 

Application paint is in accordance with International guidelines and product datasheets. Before application paint, all Steel surfaces will be clean, dry and blast to near white metal Sa2.5 (ISO8501-1).

 

UNDERWATER HULL:

  • Anticorrosive/abrasion resistant paint system, with high solids high performance antifouling
  • Primer: Interprime 820 White - Interprime 450 Bronze and aluminum - Epoxy A/F Tiecoat grey.
  • Antifouling: Micron Extra black

 

STEEL TOPSIDES:

  • High performance scheme without fairing
  • Primer: Interprime 820 White
  • Coat: Interthane 990 White or Black

 

SUPERSTRUCTURES:

  • High performance scheme without fairing
  • Primer: Interprime 820 White
  • Coat: Interthane 990 White or Black

 

Optional: On request:

  • High performance fairing and finishing scheme “PERFECTION Coating Cycle”
  • Primer: Epoxy GP coating White
  • Filler: Interfill 830/835 Grey - Epoxy Finishing Filler Cream
  • Epoxy Finish Primer: Interprime 820/880 Grey - Polyurethane Basecoat White
  • Coat: Perfection White

 

EXTERNAL DECKS:

  • High performance epoxy scheme
  • Primer: Epoxy GP Coating White
  • Filler: Interfill 830 Grey
  • Primer: Interprime 820 Grey

 

ENGINE ROOM, LOCKERS, TECH.SPACES:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer: Interior Primer 860 White/Grey
  • Coat: Interior Finish 750 RAL

 

BILGES, VISIBLE AREAS WET, STEEL:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer: Interior Primer 860 White/Grey
  • Coat: Interior Finish 750 RAL

 

INTERIORS, BEHIND LININGS:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer: Interior Primer 860 White/Grey

EXTERIOR DECK SPECIFICATIONS

The handrails realized in Stainless steel AISI 316 with a diameter of about 42 mm. Security and service handrails will be realized wherever necessary. All external decks will be covered with Flexigel Decoro. The external stairs will also be covered with the same product. Ceilings in wood with white color surface. The yacht will be equipped with a half pipe 200 mm heavy duty fender in stainless steel for hull protection.

 

Optional: on request.

  • The external decks will be covered with Natural Teak 12 mm thickness glued with vacuum technology, with a reasonable uniformity of the color.

 

Windows Doors and Porthole:

  • Lower deck: Portholes with frame in AISI 316 Steel, brand SCM or similar diam. 300 mm with tempered glass and polished stainless steel glass list and security aluminum cover painted white. On request in accordance with RINA rules, some portholes can be open type with alarm sensor on Automation plant, if necessary.

 

Main Deck and Upper Deck:

  • Windows with sealed glass Dark grey color thickness glass 10 mm.

 

Pilothouse:

  • Fixed windows with sealed tempered glass with thickness 10 mm glass list . Professional wipers with arms in AISI 316 steel brand SPEICH with fresh water washing.
  • 1 CVS ( Clear View Screen) brand SPEICH or similar.

 

Doors:

  • The deck doors shall be three, watertight and realized in light alloy, with arm hinge and block system in open position.

 

Exterior Accessories:

  • Mast in aluminum for electronics antennas, searchlight, horn and navigation lighting.
  • Stainless steel AISI 316 hand rail for protection.
  • Oversized Scuppers inox AISI 316 with Yard logo for drainage

 

Upper Deck/Pilothouse

  • Two (2) access doors in pilothouse with steering locks.
  • Audio system speakers and volume control.
  • Stainless steel AISI 316 hand rail for protection.
  • One outlet high pressure fresh water wash down system.
  • Oversized Scuppers inox AISI 316 with Ocean king logo for drainage
  • One fire fighting station UNI 45

 

Windlass area:

  • One horizontal 400 V anchor windlass, w/chain stoppers and claws.
  • Two (2) 275 Kg anchors and 250 Mt (150 + 100). 19 dim. Chain steel grade U1.
  • Hatch to self draining stainless steel anchor locker.
  • Two (2) large double horn stainless steel mooring bollards.
  • One polished stainless steel mooring bollard ‘commercial look’ at bow.
  • Two (2) fairleads in stainless steel AISI 316
  • Two (2) valves for chain high pressure washing
  • One fire fighting station
  • One stainless steel ladder from windlass area to chain and bow thruster rooms.
  • Two (2) electric fans for ventilation in Bow Thruster room and chain room.
  • One little mast for flag and bell .

 

Main Deck:

  • One outlet high pressure fresh water wash down system.
  • Deck fills for fresh water inlet
  • One access door to main saloon with lock
  • One access door to engine room with steering lock, from lower deck
  • One steel ladder from main deck to engine room, access via hatch on deck to be used also as emergency escape from ER.
  • Bulwark gates port and starboard.
  • Two (2) fairleads in stainless steel AISI 316
  • Oversized scuppers inox AISI 316 with Yacht Yard logo for drainage.

 

Swim Deck

  • One big swim platform.
  • Hot and cold fresh water shower.
  • Two (2) single horn SS mooring bollards in swim platform.

INTERIOR SPECIFICATIONS

All interior layouts will be realized in accordance with General plan ‘Naucrates 88’ signed at the moment of business agreement.

 

GUESTS FINISHING STANDARDS STYLE

The interiors will follow the decoration theme designed by Studio Green Yachts on final decor drawings.

 

MATERIALS AND SAMPLES

  • All materials, woods, surfaces finishing, varnished or painted parts, upholstery, leathers, hardware etc, will be presented to Owner for approval before starting of building interiors.

 

MOCK UP

  • A mock up of a typical interior corner will be built and presented to Owner for approval.

 

WOODS

  • Different kind of high gloss and matt varnished wood for walls, doors and furniture like oak or similar.

FABRICS

  • To be selected from yard quality products catalogs.

 

DOORS

  • Doors will have hardware like anti-rattling devices and door holders.

 

CABINETRY INTERIORS

  • All interior of furniture lockers, will be mat wood paneled, provided with cloths hanging devices and divided in areas with drawers and shelves following the Owner requests.
  • Dishes, cups and cutlery, china and glasses (Owner supply) will be properly located following the Owner request.

 

TYPICAL GUEST CEILING CONCEPT

  • The ceiling of a typical space will include one level change contoured by wooden frames; the recessed areas will incorporate fabric, wood or leather.

 

TYPICAL GUEST LIGHTING CONCEPT

Lighting will be provided by different sources as:

  • Ceiling spotlights
  • Wall lights
  • Free standing furniture lights
  • "Rope" courtesy lights around ceiling frames and under furniture.
  • Step lights.
  • Wheelhouse night lights.

 

TYPICAL GUESTS CURTAIN CONCEPT

  • Fabric decorative curtains and blinds. Type of curtain will vary space by space and may include Venetian blinds or sun rolling blinds.

 

TYPICAL GUEST FLOORING CONCEPT

  • Wood staves floor or carpet.

 

TYPICAL GUEST BATHROOM CONCEPT

  • Washbasin and shower tray in ceramic.
  • Shower panel in ceramic tiles.
  • Glass shower door.

 

TYPICAL GALLEY CONCEPT

  • Lacquered wood furniture.
  • Stainless steel or Corian top.

 

ART

  • The Owner will supply all the art which will be installed by the shipyard.

 

CREW FINISHING STANDARDS

STYLE

  • The interiors will follow the decoration theme designed by Studio Green Yachts on final decor drawings.
  • WOODS They will be varnished wood and laminated wood.
  • DOORS Doors will have hardware like anti-rattling devices and door holders.
  • CABINETRY INTERIORS All interior of furniture lockers, will be mat wood paneled, provided with clothes hanging devices and divided in areas with drawers and shelves following the Captain requests.
  • TYPICAL CREW CEILING CONCEPT : They will be varnished wood and laminated wood.
  • TYPICAL CREW LIGHTING CONCEPT: Spot lights, nightstand lights and steps lights
  • TYPICAL CREW CURTAIN CONCEPT: Venetian blinds
  • TYPICAL CREW FLOORING CONCEPT: Wood staves floor or carpets.
  • TYPICAL CREW BATHROOM CONCEPT: Washbasin and shower tray in Corian. Shower panel in mosaic or ceramic tiles.
  • Glass shower door.

 

LOWER DECK

Owner Stateroom

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak (snow)
  • Oak flooring
  • Wall wardrobe
  • Oak furniture ivory color with wood accent white oak snow color.
  • King size bed
  • Ceiling in white lacquered wood
  • LED Spot

 

Owner Bath

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak color snow
  • Oak flooring
  • Wood Door
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in ceramic Marazzi brand
  • Ceiling in white lacquered wood
  • LED spot

 

Guest Suites:

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Large Oak wardrobe
  • Two large beds in brushed oak with wood drawers in the base;
  • Ceiling in white lacquered wood
  • Oak doors white color
  • LED Spot

 

Guest Baths:

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak color snow
  • Oak flooring
  • Wood Door
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Ceramic Shower
  • Shower covering in mosaic Appiani brand
  • Ceiling in white lacquered wood
  • LED spot

 

MAIN DECK

Main Salon

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Oak brushed furniture ivory color with accent in oak white color
  • TV 48'' brand SAMSUNG
  • Relaxation area with sofa
  • Ceiling in white lacquered wood with brushed oak staves
  • LED Spot
  • Wall lights

 

GALLEY

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent: white oak snow color
  • Oak flooring
  • Inox wall hood
  • Inox sinks 400 x 400 mm
  • Two induction plates brand ‘ SAMSUNG’
  • Refrigerator: side-by-side brand SAMSUNG
  • Two refrigerators brand SAMSUNG
  • Dishwasher brand ‘ SAMSUNG’
  • Oven brand ‘SAMSUNG
  • Multifunction Microwaves brand ‘SAMSUNG’
  • LED Spot

 

LAUNDRY/UTILITY ROOM

  • Wall covering: laminate Ivory color
  • Storage wardrobes in laminate
  • Washer brand ‘Ariston Aqualtis AQ9F’
  • Dryer brand ‘Ariston TCL631’
  • Porcelain flooring

Crew Area:

  • Wall covering: laminate Ivory color
    Storage in laminate
  • Oak flooring Gray color
  • TV 24”
  • Baths with laminate furniture and recessed sinks

 

UPPER DECK

Pilot House:

  • Wall covering: Brushed oak brown color with wood inserts polished light brown color
  • Wood accent: coated oak color light gray
  • Oak flooring
  • Helm station in brushed oak, opaque coating, brown color
  • Furniture in brushed oak, opaque coating, brown color
  • One helm chair/backseat in stainless steel & leather
  • Large seats in brown color
  • Ceiling in oak wood, opaque coating, brown color
  • LED spot

Lighting

Interior Lighting:

  • All interior lighting will be realized with LED technology also in Crew areas
  • Owner, main saloon, upper deck and pilothouse lighting will be equipped with dimmer.
  • Spot LED lights brand BCM

 

Optional: on request

  • Underwater lighting: On stern will be installed 6 Underwater LED lights brand Cantalupi Lighting mod. SEALED SY9 or similar

External lighting:

  • Spot LED lights on ceiling brand BCM Courtesy LED lights brand BCM

Delivery Package
  • Fenders & fender lines (6).
  • Flare kit,
    6 whistles,
  • Ship’s bell, & Distress Flag.
  • Mooring lines (8) .
  • Zincs and Antifouling bottom paint.
  • First aid kit.
  • Portable fire extinguishers throughout the boat.
  • Safety package for unrestricted navigation >50 mg.
    Fuel filters for main engines and generators.
  • Spare parts, miscellaneous electrical and plumbing fittings.
  • 100 ft. cord for dockside electric connection.
  • Portable air horn
  • Technical files with diagrams, owner manual and instruction to the captain

EXTRA REQUESTS

UPPER DECK:

  • 1 Additional Cabin, Master Cabin
  • 1 Additional Bathroom, Master Bathroom
  • 1 Additional Dressing Room, Master

 

LOWER DECK

  • Beach Club Stern ­White Walls and Ceiling
  • Besenzoni Lifting Ladder
  • Folding sides hull stern

 

MAIN DECK

  • Custom Infinity pool
  • Electrical Tent Covering
  • Folding Bulwarks on both sides

 

GENERAL

  • Stainless steel frames yachting style doors
  • Domotic System like SONOS
  • Ice Class Possibility
  • Tender Castoldi Jet 21, supplied by client
  • Crane for 1500Kg
  • Interior Minimal design

Main Salon
Master Stateroom
Pilothouse
Pilothouse Looking Aft
Running
Starboard Profile
Starboard Bow