OCEAN KING 88
88' (26.97m) Ocean King
LOA: 88' 6" (26.97m)
Beam: 26' 2" (7.98m)
Draft: Max 8' 2" (2.49m)
Speed:
Cruising 10 knots
Maximum 12 knots
Location: Italy
Year: Mfg-2019
Model-2019
Builder: Ocean King
Type:
Expedition Yacht
Price: approx. ($7,789,946 USD)
6 800 000 € EUR
Additional Specifications For OCEAN KING 88:
LOA: 88' 6" (26.97m)
Beam: 26' 2" (7.98m)
Min Draft: 7' 6" (2.29m)
Max Draft: 8' 2" (2.49m)
Hull Material: Steel
Hull Config: Full Displacement
Hull Designer:
Deck Material: Teak
Tonnage: 238
Range: 5,000 Miles
Int Designer: Innave Yacht Design
Ext Designer: Innave Yacht Design
Fuel Capacity: 10,166 g (38,482 l)
Water Capacity: 2,110 g (7,987 l)
Holding Tank: 400 g (1,514 l)
Flag: TBA
Location: Italy
Price: approx. ($7,789,946 USD)
6 800 000 € EUR
Year: Mfg-2019 Model-2019
Builder: Ocean King
Model: Ocean King 88
Type:
Expedition Yacht
Top:
Speed:
Cruising 10 knots @ 1400 RPM
Max 12 knots
Engines:
Staterooms: 5
Sleeps: 10
Heads: 5
Crew Quarters: 2
Crew Berths: 4
Captain Cabin: No
Classifications:
MCA: None ISM: None
Description

The Ocean King 88's lineage is a direct path from a deep sea tug.  Genetic modifications have been made to influence her nature to be an outstanding Explorer Yacht without losing the intrinsic nature of this waterborne beast.

She truly is a tug in yacht clothing, massively built with commercial ship’s systems in all of the important places yet refined and equipped to meet yacht standards of comfort and use. 

The Ocean King 88 is  the Alpha in this size group of Explorers because of her commercial heritage. The 88 also has the most living space with 2470 sq ft of interior space and 2690 sq ft of exterior space for a total of 5160 sq ft of living area and can carry the largest tender in the group!
Her heart is either a Commercial rated A rated MAN or a Commercial A rated Cat.  These engines have 20,000 hours before major overhauls.  At cruising speed that is 200,000 nm of exploring the world in safety and comfort. 

The use of highly reliable commercial system and no nonsense outfitting reduces down time and operating costs. 

The Ocean King is the Alpha predator of Explorer yachts, refined, designed and built to roam the seas.  
HULL

The Yacht will be built in accordance with the requirements as from the Italian Directive in force on the date of the signature of the agreement and directive “Recreational Craft Directive 94/25/CE” and in accordance with “RSG Guidelines”, Design Category “A”. 


Double bottom steel hull with integral tanks. All the tanks shall be structural. The double bottom shall be extended from the collision bulkhead to the transom, excluding the area reserved for the engine room. Proper holes shall be drilled in the keelsons, floor plates and currents to enable the easy drainage of liquids. The tanks included in the double bottom shall be provided with a proper number of manholes for inspection and cleaning. All the tanks shall have drainage. The fresh water tanks shall be treated with products suitable for the conversion of running water.

The plating, built up profiles and standard profiles are to RINA  specifications  S275 JR (Grade A) or better.

The workmanship and welding are according to the highest standards of shipbuilding and RINA regulations. Topsides, decks and transom shall typically be fair and smooth. Sheer, deck lines and rub rails executed fair and without bumps. All welding work carried out by qualified welders. Where appropriate the welds will be ground smooth.

  • Steel Hull Plating S 275 JR Grade A  factory blasted and epoxy coated, thickness: 
  • Bottom Plate = 5/10” - 4/10” (12-10-9 mm)  and Side Plating = 5/16” (8-7-6 mm).
  • Keel: Steel S 275 JR Grade A thickness 8/10”  ( 20 mm).
  • Collision bulkhead with watertight bilges and bulkheads throughout the boat.
  • Anchor placement in two hawseholes semi-recessed type realized in Stainless steel AISI 316.
  • 2 propellers without nozzle of 1280 mm of diameter  with five blades.
  • 2 Rudders flanged to the shaft  “NACA” profile
  • Stainless steel bulwark caps, SS solid rod lining at all scuppers and hawseholes and 4” SS pipe rub rail.
  • Stainless steel ports in hull sides with deadlights.
  • Interior partition walls are fully insulated up to 3¼” for maximum sound proofing.
  • All accommodations thermally insulated, including the hull.
  • All house doors are water resistant and lockable
EXTERIOR DECK SPECIFICATIONS

The handrails realized in  Stainless steel AISI 316  with  a diameter of about 48 mm ( 1” 1/2) . The external Stairs will also be equipped with handrails in Stainless steel AISI 316 .  Security and service handrails will be realized wherever necessary. 

The external decks will be covered with Natural Teak  12 mm thickness glued with vacuum technology, with a  reasonable uniformity of the color.

The external stairs will also be covered with the same product.

Ceilings in wood with white color surface.

The yacht will be equipped with a half pipe 200 mm heavy duty fender in stainless steel for hull protection.

 

Windows Doors and Portholes:

Lower deck:
14 portholes with frameS in AISI 316 Steel, brand SCM or similar diam. 300 mm with tempered glass and polished stainless steel glass list and security aluminum coverS painted white. On request in accordance with RINA rules, some portholes can be open type with alarm sensor on Automation plant, if necessary.

Main Deck and Upper Deck:
28  Windows with sealed glass ,dark grey color thickness glass 10 mm.

Pilothouse:  
7 fixed windows with sealed tempered glass with thickness 10 mm glass list  .

4 professional wipers with arms in AISI 316 steel brand SPEICH with integrated command in Boening monitoring,  with fresh water washing .

1 CVS ( Clear View Screen) brand SPEICH or Similar.


Doors: 
The deck doors shall be three, watertight and realized in light alloy, with arm hinge and block system in open position.

 

Exterior Accessories:

Fly-bridge:

  • 1 large  sundeck with cushions.
  • 2 Small settees with cushions.
  • 1  fridge station
  • 2 Tea tables
  • Courtesy LED lights on sundeck and settee.
  • 1 outlet high pressure fresh water wash down system.
  • 2 cleats for flags
  • 2 doors with steering locks for funnel access.
  • Mast in aluminum for electronics antennas, search light, horn and navigation lighting.
  • Audio system speakers and volume control.
  • Stainless steel AISI 316 hand rail for protection.
  • Oversized Scuppers inox AISI 316  for drainage with Ocean king logo 

 

Upper Deck/Pilothouse

  • Two (2) access doors in pilothouse with steering locks.
  • One (1) access door in upper deck with steering locks.
  • One prep station with small refrigerator and sink
  • Audio system speakers and volume control.
  • Stainless steel AISI 316 hand rail for protection.
  • One outlet high pressure fresh water wash down system.
  • Oversized Scuppers inox AISI 316  for drainage with Ocean king logo 
  • One fire fighting station UNI 45
  • One ladder with teak steps for access to Fly-bridge.
  • One ladder with teak steps for access to Main deck.
  • One ladder with teak steps for access to Bow – windlass area.
  • Nr. 1 professional  Knuckle hydraulic  tender crane HS Marine  with boom about 5.0 m.  and 1750 Kg lifting capacity 

 

Windlass  area:

  • Two (2) horizontal  400 V anchor windlass, w/chain stoppers and claws.
  • Two (2) 275 Kg anchors and 250 Mt (150 + 100) . 19 dim. Chain steel grade U1.
  • Hatch to self draining stainless steel anchor locker.
  • Two  (2) large double horn stainless steel mooring bollards.
  • One polished stainless steel mooring bollard ‘commercial look’ at bow.
  • Two (2)  fairleads in Stainless steel AISI 316
  • Two (2) valves for chain high pressure washing
  • One fire fighting station
  • One stainless steel ladder from windlass area to chain and bow thruster rooms.
  • Two (2) electric fans for ventilation in Bow Thruster room and chain room.
  • One little mast for flag and bell .

 

Main Deck:

  • One shoe rack with teak wood cover
  • Aft deck Dining table with natural teak cover with 2 stainless steel supports.
  • One outlet high pressure fresh water wash down system.
  • Deck fills  for  fresh water inlet
  • Two access doors from main deck to Crew area and Kitchen with steering lock.
  • One access door to main saloon with steering lock
  • One access door to engine room with steering lock
  • One steel ladder from main deck to engine room.
  • Teak 180 mm wide cover all bulwarks.
  • Bulwark gates port and starboard.
  • One integrated steel sofa with cushion.
  • Two (2)  fairleads in Stainless steel AISI 316
  • Oversized Scuppers inox AISI 316 for drainage with Ocean king logo 

 

Swim Deck

  • One big swim platform with teak cover , approx 15 Meter/square
  • Hot and cold fresh water shower.
  • One access door watertight to garage.
  • Two (2) single horn SS mooring bollards in swim platform.
SUPERSTRUCTURE

The superstructure built in light alloy type H 5083 weld in accordance with high standard RINA. The workmanship and welding shall be typically fair and smooth. Deck lines executed without bumps. All welding done by experienced welders.  All external welds will be ground smooth.

  • Aluminum 5083 type for Superstructure:  plate:  1/4”  (6-5 mm).
  • Plating: Light alloy type 5083  thickness: 6mm.
  • Built up profiles and stiffeners: As plating.
  • Mast: It shall be realized in welded light alloy and bolted to the bridge with support for radars, antennas, lights.
  • Light alloy 5083 Superstructure painted with marine paint.
ENGINE ROOM

Two MAN  D2842 LE 412 rated @ 1800 rpm 588 Kw continuous commercial duty marine diesel engines, four stroke, 12 cylinder V , turbocharged , intercooler  with mechanically controlled fuel injection.

Two Marine Gearboxes Reintjes WAF 364 reducer   i=4,053

Engine Data:

  • Bore and Stroke:                  128 mm x 142 mm
  • Cylinder displacement:       21,916 liters
  • Weight:                                  1.790 Kg

 

Rating Level:

  • 760 Hp (588 KW) at  1.800 rpm
  • Fuel consumption at maximum power:  148 l/hr each
  • Typical 20,000 hours to major engine service or rebuild
  • Soft engine mounts with anti vibration coupling

 

Engine room engine gauges:

  • Insulated engine room with hole plating coating for great professional look, easy maintenance and cleaning.
  • 1 Main Switchboard with Touch Screen monitor and automation plant.
  • 1 door with steering lock from engine room to stern garage.
  • 1 aluminum door with steering lock from main deck to engine room
  • 2 Marinox Shaft Lines 105 mm Diam.
  • 2 Five (5) bladed bronze propellers diameter:  50” (128 cm) without nozzle
  • Watertight access doors
  • Polished stainless steel hand rails
  • 4 axial fans 400 Volts  0,75 Kw at 1400 rpm  with automatic  fire dampers
  • AC and DC lighting
  • Aluminum non-slip flooring
INSULATION AND SOUNDPROOFING

Engine Room Insulation and Soundproofing:

The base material shall be mineral wool with a density of 50 Kg/m3 and a variable thickness ranging from 50 to 100 mm, according to the different needs. The soundproofing system shall mainly consist of two types of treatment: either a sandwich of two layers of low-density mineral with a sheet copper layer in between, or a simple layer of mineral wool, according to the areas to be protected as well as the needs. In both cases the final overlapping of a holed aluminum sheet shall be foreseen. The insulating material shall be connected to the walls with metal nails either welded or glued to the structure. 

 

Living areas Insulation and Soundproofing:
The base material shall be mineral wool with a variable density ranging from 15 to 50 Kg/m3 and a variable thickness ranging from 25 to 60 mm, according to the different needs. The insulating material shall be connected to the walls with metal nails either welded or glued to the structure

NOISE LEVELS

Acoustic and noise anti vibration insulation in engine room, all interior bulkheads, main & lower deck floors. Double acoustic bulkheads between the engine room and accommodations. Maximum acceptable sound levels throughout vessel shall be determined with the vessel operating at maximum continuous rated speeds with all specified equipment in operation.

Estimated sound levels at Cruise speed at 11 knots with all normal services and air conditioning not in operation are as follows.

Location:

  • Main Saloon                                                          <60 dB
  • Pilot House                                                            <58 dB
  • Owner Suite                                                          <58 dB
  • Guest Staterooms                                                <62 dB
SYSTEMS

Fuel System:

Fueling station on main deck (one starboard one port) w/overflow tank, sight gauges and spill retention system. Large diameter piping system vents in funnels in order to refuel diesel in few hours.

Fuel transfer system from tanks (six) to day tanks (two) with pre-plumbed professional 400 V - 50 Hz pump ‘Gianneschi’ mod. CP30  0,37 Kw at 1450 rpm. All the valves for transfer operation are with electrical actuators and will be controlled from the Automation plant through touch-screen monitor in the main switchboard in engine room and/or in pilothouse.

The fuel transfer from tanks to day tanks shall take place through a centrifugal purifier with water separator Alfa-Laval or Westfalia mod. OTC 3 capacity 400 l/h.

  • Fuel lines are in carbon steel with weld piping.
  • Dual Racor  filter/water separators 500 micron from day tanks to main engines with manifold.
  • Racor  filter/water separators 500 micron at generators.
  • Fuel tanks (eight) all integral to hull, and two (2) day tanks.
  • Liquid level indicators on all fuel tanks, as well as sight gauges on day tanks brand VEGA.

 

Main Engines Cooling and Exhaust System

Sea water cooling open circuit for engines and generators, riser type with heat exchanger - brand Co.Fe.Me or equivalent.

Dual sea chests with professional manifold. The sea inlets shall be realized by using a steel pipe with a proper thickness, welded to the bottom plating and flanged to the sea cock. Filters shall be in stainless steel.

The pipes shall be in Aisi 304 steel and galvanized steel.

 

Bilge Pumping System

A complete professional bilge pumping system is installed with two professional bilge pumps 400 V- 50Hz 4 Kw each at 1450 rpm with a capacity of 20 M3/h with automatic alarms for high water in bilge and water sensor. Each pump will have inline check valves and auto/off/manual selection switch. All pumps will be also used for fire-fighting use.

All pipes shall be in galvanized steel.

The bilge tank shall have the capacity as foreseen by the regulations and a discharge line ashore in compliance with MARPOL regulations. Valves plant will be electric Wafer type and will be controlled from the Automation plant through touch-screen monitor in main switchboard in engine room and/or in pilothouse.

On request a RWO purifying system for bilge water is installed.

 

Fresh Water System

One complete water pressure system will be installed, with integrated steel tank, two professional pre-plumbed JET pumps, 400 V- 50Hz 2 Kw at 1450 rpm  brand ‘Gianneschi’ with pressure tank, piping, valves, fittings, pressure gauge and pressure control. On request, will be supplied a second JET pump for pressure wash down decks with some taps with quick coupling.  On swim platform will be installed one faucet with cold and hot water.

The pump(s) are connected to one pressure manifold and are laid out so that they can serve the system together or separately. The pump suction lines are connected to the crossover line between the tanks to allow the tanks to be drawn together or separately.

  • All pipes shall be in stainless steel AISI 316, press-fitting type
  • 2 Electric hot water heaters 100 l each with hot water professional pumps 400 V- 50Hz, 3Kw.
  • Liquid level indicators on all water tanks.
  • 500 Lt/h water making system IDROMAR  or TECNICOMAR.
  • One sand filter and one UVA sterilization system are installed on the pipe line .

 

Black Water System

One tank for black water with a capacity of 1,500 liters, with shore pump-out capability, and pre-plumbed pump for overboard discharge capability. WC discharges shall be collected in appropriate tank provided with a breather at the shaft top, with a flexible pipe and deodorant filter and treated through a purifying plant with Hamman or Tecnicomar, dimensioned for the number of people who can be embarked. All pipes and accessories shall be realized in Stainless Steel AISI 316 in engine room and in PE-HD outside engine room.

 

Grey Water System

One tank for grey water with a capacity of 1,500 liters. Gray water from the shower, basins, kitchen and food stores, laundry shall discharge via gravity into the collection tank. The gray water shall be directly discharged outboard or to the treatment plant. All pipes and accessories shall be realized in DRAIN 316.

 

Windlass & Winches

  • Two professional horizontal anchors windlass 400 Volts 7.5 Kw @ 1450 rpm with chain gypsy for 19 mm chain brand: Romagnoli  or similar
  • Two Stern 400 Volts 5.5 Kw with inverter professional winches  brand: Romagnoli or similar

 

Bow Thruster

One professional bow thruster 400 Volts  55 Kw @1450 rpm with joystick control unit on the pilothouse brand: Romagnoli model: BTX 1200 CC or Similar.

 

Optional : Stern Thrusters

Twin professional Stern Thrusters 400 Volts  22 Kw @ 1450 rpm each with joystick control unit on the pilothouse brand: Romagnoli models: BTX 350 CC or Similar.

 

Tender Crane

One professional fully foldable telescopic knuckle type crane with articulated boom: capacity 900 Kg at 5.5 mt. brand: HS Marine mod. AK7. Optional Remote controller.


Optional:

One Professional knuckle boom type crane Hydraulic model AK10 with capacity 1750 Kg, brand: HS MARINE with Remote controller.

 

Stabilizer system

On board will be installed One Rodriguez system ESF-2200  Electric, Active and Zero-Speed stabilizer fins or similar brand.

 

Hydraulic Gangways

  • One stern swimming ladder brand Besenzoni  model SI 408 or similar brand
  • One telescopic  hydraulic gangways brand Besenzoni model PI 383  or similar brand

 

Air Conditioning and Heating System

The plant consist of 1 water cooler block, with heat pump. The Fan coils shall be placed in the insulated rooms for water/air treatment.  CONDARIA brand or Similar with 240.000 BTU/h capacity with UTA for lower deck + 30 Kw boiler. The plant will be monitored from Automation plant on board.

In general the best thermal hygrometric conditions shall be guaranteed in hot and cold waters. The system is rated for Mediterranean use. Arctic or Tropical condition will be quoted on request.

 

Compressed Air Plant

A compressed air power station shall be foreseen and planed in A.M., which will provide low pressure air (about 7 bar) for any automatism and board services. For such a plant an air cooled E/compressor, an air dehydrator filter and a tank with a capacity of 100 lt at 7 bar pressure.

 

Sea Water Fire fighting system

In the yacht will be installed one ‘ Self Protection’ system with two emergency professional pumps 400 Volts 3 phase, 4 Kw at 20 mt with direct connection to Sea Chest or through appropriate selection valve through bilge tank and one diesel pump that can be operated in case of an electrical  failure. On board will be 4 fire-fighting stations with hydrants and hoses UNI45 type. The system is controlled from Boening automation

 

Fire Detection system

In the yacht will be installed one smoke detection in each room and one control detection system in Pilot House. Brand Autronica or similar.

 

Engine Room Fire fighting system

  • In the yacht will be installed one ‘ AEROSOL’  fire-fighting  system  allocated in appropriate boxes direct  in engine room.
  • 1 remote station with emergency control  for closing  diesel supply and axial-fan in engine room. 
ELECTRICAL EQUIPMENT

All electrical equipment located so as to be readily accessible for maintenance, repair or removal and is of a type proven satisfactory for marine use. All electrical equipment and wiring tested in accordance with applicable RINA rules. Any and all drawings and schematics relevant to the system shall be furnished to the vessel owner.

The installation shall be splash proof in the interior and totally water proof at the exterior. All cables will be numbered and marked on the drawings. All the low tension cables and those for radio frequencies are laid separately from those at 220/400 V.  When it is not possible, the cables with the same degree of insulation are used for Diesel Generators.

An earth plate 3x400 Volts/50 Hz shall be installed and connected to an isolation transformer.

 

Automation Plant

A state of the art  Automation Plant will be installed on board,  Brand BOENING with touch screen panel on Main Switch Board and  LCD monitor in  pilothouse. This Plant  will control:  Axial fans in engine room, Navigation lights, Bilge system, Fuel transfer,  Fire-Fighting system pumps, Diesel plant, Tank liquid level gauges, Power Distribution, Generators parallel, Shore power, main Pumps, Cameras, Search lights, Wipers, Horn, Rudders.

 

Navigation Plant

A state of the art  Automation Plant will be installed on board,  Brand BOENING with 3 touch screen monitors 19” and 2 touch screen monitors 15” in pilothouse. This integrated bridge, control of many system and integrated with FURUNO navigation technology ( GPS, Radars, Autopilot, Chart Plotters etc.) grant a professional bridge look.

 

Diesel Generators

  • Two 400 V - 50 Hz Kohler 80 EFOZ - 80 kW, 100 kVA generators, in sound shield, with heat exchanger cooling, wet exhaust and exhaust separator
  • AC/DC distribution panels in utility room, main deck and pilothouse
  • Two (2) 150 amp engine driven alternators
  • Aft shore power hook-up, with 125 amp 100’ Glendinning cable with connector 400 Volts 3 phase with connection at the board transformer for constant voltage and isolation assurance. Will be provided also an automatic parallel with the shore power in order to keep power during the change from generators to shore power and vice versa.
  • The Main switchboard with frontal access, Touch Screen monitor, constructed in steel or painted aluminum will be positioned in the engine room.
  •  
  • 1 Charger  Mastervolt  400 Volts, 100 Amp for service batteries 24 Volts.
  • 1 Charger  Mastervolt  400 Volts, 100 Amp for emergency batteries 24 Volts.
  • 1 Charger  Mastervolt  220 Volts, 75 Amp for engines starter batteries.

 

Batteries:

  • Two (2) sets of batteries Mastervolt  24 Volts with a capacity of 270 Amps. For services
  • Two (2) sets of batteries Mastervolt  24 Volts with a capacity of 360 Amps. For emergency.
  • Four  (4) Set of batteries Mastervolt  12 Volts with capacity of 370 Amps. For engines starter
  • Masterbus and Mastershut for monitoring batteries and charger status

 

Distribution Circuit:

  • 400 V 50 Hz AC Three-phase circuit
  • 220 V 50 Hz AC mono phase circuit
  • 24 V DC Emergency circuit

 

Ship Name, Yard Plate and Ocean King Brand

The Ship name realized in painting aluminum letters will be installed on stern. On request will be installed a ship name realized in Inox plate with LED lights. On two funnels will be installed the Ocean King Logo realized in Inox plate with backlit  LED lights.

On Valves, pumps and accessories will apply special identifying  plates. On doors  will apply appropriate hazardous labels.  Inox Yard plate will apply on board.

NAVIGATION AND COMMUNICATION EQUIPMENT
  • 3 Monitors BONING touch screen 19” for navigation and Automation
  • 2 Monitors BONING touch screen 15” for Integrated Bridge command
  • 1 IPAD-IPHONE Interface
  • 1 Bronze Eco Sounder  FURUNO  1 Kw B258
  • 1 Digital fish finder FURUNO DFF1
  • 1 RADAR ARPA FURUNO  12 Kw  with 6,5 ft Open array  96 Nm
  • 1 RADAR FURUNO UHD 6 Kw with 4 ft Open array  64 Nm
  • 1 FURUNO MAXSEA Professional navigation software ECS
  • 1 FURUNO SATELLITE COMPASS Imo Version SC-50
  • 1 Hub 101 Ethernet FURUNO
  • 1 GPS FURUNO GP-33
  • 1 Autopilot FURUNO  NAVPILOT 700-E2A
  • 1 AIRMAR WIND/WEATHER STATION NMEA 2000
  • 1 AIS Trasponder FURUNO FA-50 CLASS B
  • 2 VHF FURUNO  FM-4721 DSC
  • 1 FURUNO NAVTEX RECEIVER NX-300
  • 1 FURUNO Ocean Signal EPIRB GMDSS
  • 1 FURUNO Ocean Signal SART GMDSS
  • 1 Satellite  Antenna INTELLIAN  TV SAT I9P ( Europe)
  • 1 FURUNO IMMARSAT FBB-250
  • 1 Search light  24 Volts integrated in Boening monitoring
  • 1 Magnetic  Compass 
  • 2 Controls for  Main Engines + full monitoring engine data  integrated in Boening monitoring
  • 1 Control for  bow thruster integrated in Boening monitoring
  • 2 Controls  for  generators integrated in Boening monitoring
  • 1 LCD  Control for  Wipers integrated in Boening monitoring
  • 1 navigation Lights integrated in Boening monitoring
PAINTWORK

Paint will be  ‘International Marine Paint’ . All painted surfaces will be free of dust, runs and orange peel.

System of cathodic protection: The system consists of a series of zincs placed in the hull, rudder and propeller cuff.

Application paint is in accordance with International guidelines and product datasheets.

Before application paint, all Steel surfaces will be clean, dry and blast to near white metal Sa2.5 (ISO8501-1).

 

UNDERWATER HULL:

  • Anticorrosive/abrasion resistant paint system, with high solids high performance antifouling
  • Primer:   Interprime 820 White  - Interprime 450 Bronze and aluminum -  Epoxy A/F Tiecoat grey
  • Antifouling:  Micron Extra black

 

STEEL TOPSIDES:

  • High performance scheme without fairing
  • Primer: Interprime 820  White
  • Coat: Interthane 990  White or black

SUPERSTRUCTURES:

  • High performance fairing and finishing scheme “PERFECTION Coating Cycle”
  • Primer:  Epoxy GP coating White
  • Filler:  Interfill 830/835 Grey –Epoxy Finishing Filler Cream
  • Epoxy Finish Primer: Interprime 820/880 Grey –Polyurethane Basecoat White
  • Coat: Perfection White

 

EXTERNAL DECKS:

  • High performance epoxy scheme
  • Primer: Epoxy GP Coating White
  • Filler: Interfill 830 Grey
  • Primer:  Interprime 820 Grey


ENGINE ROOM, LOCKERS, TECH.SPACES:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer: Interior Primer 860 White/Grey
  • Coat: Interior Finish 750 RAL


BILGES, VISIBLE AREAS WET, STEEL:

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer:  Interior Primer 860 White/Grey
  • Coat: Interior Finish 750 RAL


INTERIORS, BEHIND LININGS: 

  • Epoxy anticorrosive scheme, with polyurethane finish
  • Primer:  Interior Primer 860 White/Grey
INTERIOR

All interior layouts will be realized in accordance with General plan ‘Ocean King 88’ signed at the moment of business agreement.

 

GUESTS' FINISHING STANDARDS

STYLE 
The interiors will follow the decoration theme designed by INNAVE on final decor drawings

MATERIALS AND SAMPLES 
All materials, woods, surfaces finishing, varnished or painted parts, upholstery, leather, hardware etc, will be presented to Owner for approval before starting of building interiors.

MOCK UP  
A mock up of a typical interior corner will be built and presented to Owner for approval.

WOODS 
Different kind of high gloss and matt varnished wood for walls, doors and furniture like oak or similar.

FABRICS  
To be selected from quality products catalogues.

DOORS  
Doors will have hardware like anti-rattling devices and door holders.

CABINETRY INTERIORS 
All interior of furniture  lockers, will be matt wood paneled, provided with clothes hanging devices and divided in areas with drawers and shelves following the Owner requests.

Dishes, cups and cutlery, china and glasses (Owner supply) will be properly located following the Owner request.

TYPICAL GUEST CEILING CONCEPT  
The ceiling of a typical space will include one level change contoured by wooden frames; the recessed areas will incorporate fabric, wood or leather.

TYPICAL GUEST LIGHTING CONCEPT  
Lighting will be provided by different sources as:

  • Ceiling spotlights
  • Wall lights
  • Free standing furniture lights
  • "Rope" courtesy lights around ceiling frames and under furniture.
  • Step lights.
  • Wheelhouse night lights.

TYPICAL GUESTS CURTAIN CONCEPT  
Fabric decorative curtains and blinds.

Type of curtain will vary space by space and may include venetian blinds or sun rolling blinds.

TYPICAL GUEST FLOORING CONCEPT 
Wood staves floor or carpet.

TYPICAL GUEST BATHROOM CONCEPT 
Washbasin and shower tray in Corian.

Shower panel in mosaic or ceramic tiles.

Glass shower door.

TYPICAL GALLEY CONCEPT 
Lacquered wood furniture.

Stainless steel or Corian top.

ART 
The Owner will supply all the art which will be installed by the shipyard.


CREW FINISHING STANDARDS

STYLE  
The interiors will follow the decoration theme designed by INNAVE on final decor drawings.

WOODS 
They will be varnished wood and laminated wood.

DOORS 
Doors will have hardware like anti-rattling devices and door holders.

CABINETRY INTERIORS 
All interior of furniture  lockers, will be mat wood paneled, provided with clothes hanging devices and divided in areas with drawers and shelves following the Captain requests.

TYPICAL CREW CEILING CONCEPT 
They will be varnished wood and laminated wood.

TYPICAL CREW LIGHTING CONCEPT  
Spot lights, nightstand lights and steps lights

TYPICAL CREW CURTAIN CONCEPT  
Venetian blinds.

TYPICAL CREW FLOORING CONCEPT  
Wood staves floor or carpets.

TYPICAL CREW BATHROOM CONCEPT

  • Washbasin and shower tray in Corian.
  • Shower panel in mosaic or ceramic tiles.
  • Glass shower door.


LOWER DECK

Owner Stateroom 

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  •  Wood accent:  white oak (snow)
  •  Oak flooring
  •  Wall wardrobe
  •  Oak furniture ivory color with wood accent white oak snow color.
  •  TV 42''
  •  King size bed with recessed LED in headboard and wood drawers in the base
  •  Ceiling in white lacquered wood
  •  LED Spot

Owner Bath 

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  •  Wood accent:  white oak color snow
  •  Oak flooring
  •  Glass Door
  •  Oak furniture ivory color with wood accent white oak snow color.
  •  Suspended Sanitary
  •  Corian top and sink
  •  Corian Shower
  •  Shower covering in ceramic Marazzi brand
  •  Ceiling in white lacquered wood
  •  LED spot

Guest Suites

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  •  Wood accent:  white oak snow color
  •  Oak flooring
  • Large Oak wardrobe with
  • TV 28''
  • Two large beds in brushed oak with wood drawers in the base;
  • Ceiling in white lacquered wood
  • Oak doors white color
  • LED Spot


Guest Baths

  •  Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak color snow
  • Oak flooring
  • Door
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in mosaic Appiani brand
  • Ceiling in white lacquered wood
  • LED spot


 
VIP Suite

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak snow color
  • Oak flooring
  • Large oak wardrobe with interior yellow color
  • TV 32''
  • Queen size bed in brushed oak with wood drawers in the base;
  • Ceiling in white lacquered wood
  • Oak doors white color
  • LED Spot

 

VIP Bath

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak color snow
  • Oak flooring
  • Glass Door
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in mosaic Appiani brand
  • Ceiling in white lacquered wood
  • LED spot

MAIN DECK

  • Main Salon  

     Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak snow color
  •  Oak flooring
  • Oak brushed furniture ivory color with accent in oak white color
  • TV 50'' brand SAMSUNG
  • 8 person dining table
  • 8 chairs
  • Relaxing area with sofa brand
  • Ceiling in white lacquered wood with brushed oak staves
  • LED Spot
  • Wall lights

 

Galley

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak snow color
  • Oak flooring
  • Inox wall hood
  • Inox sinks 400 x 400 mm
  • Two induction plates brand ‘ SAMSUNG’
  • Refrigerator side-by-side brand SAMSUNG
  • Two refrigerators brand SAMSUNG
  • Dishwasher brand ‘ SAMSUNG’
  • Multifunction oven brand ‘SAMSUNG
  • Multifunction Microwaves brand ‘SAMSUNG’
  • LED Spot


Laundry/utility room

  • Wall covering: laminate Ivory color
  • Storage wardrobes in laminate
  • Two washers brand ‘Ariston Aqualtis AQ9F’
  • Washer/Dryer brand ‘Ariston AQM8D’
  • Dryer brand ‘Ariston TCL631’
  • Porcelain flooring


Crew Area

  •  Wall covering: laminate Ivory color
  • Storage in laminate
  • Oak flooring Gray color
  • TV 24”
  • Baths with laminate furniture and recessed sinks


UPPER DECK

 Lounge

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak  snow color
  • Oak flooring
  • Oak brushed furniture ivory color with accent in oak white color
  • Wardrobes
  • TV 40'' brand SAMSUNG
  • Large settee with bed
  • Ceiling in white lacquered wood with brushed oak staves
  • LED Spot

 

Captain cabin

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak  snow color
  • Oak flooring grey color
  • large oak wardrobe with drawers in white color
  • TV 24'' brand SAMSUNG
  • Large bed in brushed oak ivory color
  • Bedside table in brushed oak ivory color
  • Ceiling in white lacquered wood
  • LED Spot

 

Captain Bath

  • Wall covering: Brushed oak Ivory color with wood inserts polished white color
  • Wood accent:  white oak color snow
  • Wood accent:  white oak color snow
  • Oak flooring gray color
  • Oak furniture ivory color with wood accent white oak snow color.
  • Suspended Sanitary
  • Corian top and sink
  • Corian Shower
  • Shower covering in mosaic Appiani brand
  • Ceiling in white lacquered wood


Pilot House

  •  Wall covering: Brushed oak brown color with wood inserts polished light brown color
     Wood accent:  coated oak color light gray
  • Oak flooring
  • Helm station in brushed oak, opaque coating, brown color
  • Furniture in brushed oak, opaque coating, brown color
  • One helm chair  brand ‘Besenzoni P216 President’ or similar
  • Large settee in brown color
  • Ceiling in oak wood, opaque coating, brown color
  • LED spot
LIGHTING

Interior Lighting:

  • All interior lighting  will be realized with LED technology also in Crew areas.
  • Owner and VIP suites, main saloon, upper deck and pilothouse lighting will be equipped with dimmer switches.
  • On beds and wardrobes will be apply recessed LED lights.
  • Spot LED lights  brand Cantalupi Lighting  mod. DALY or similar

 

Underwater lighting  
On stern will be installed 6 Underwater LED lights  brand Cantalupi Lighting mod.  SEALED SY9 or similar


External lighting

  • Spot LED lights  on ceiling brand Cantalupi Lighting mod. TECNO or similar
  • Courtesy LED lights brand Cantalupi Lighting  mod. MICRO or similar
  • Spotlights with inclination setting on Upper Deck and Solarium Deck brand Cantalupi Lighting  mod. OVER or similar
  • Strips LED under sundeck and external furniture 
DELIVERY PACKAGE
  • Fenders  & fender lines (6).
  • Flare kit, 6 whistles, Ship’s bell, & Distress Flag.
  • Mooring lines (8) .
  • Zincs and Antifouling bottom paint.
  • First aid kit.
  • Portable fire extinguishers throughout the boat.
  • Safety package for unrestricted navigation >50 mg.
  • Fuel filters for main engines and generators.
  • Spare parts, miscellaneous electrical and plumbing fittings.
  • 100 ft. cord for dockside electric connection.
  • Portable air horn.
  • Technical files with diagrams, owner manual and instruction to the captain
  • Selling price is EXW Company, Chioggia (Venice)
Salon (Sistership)
(Sistership)
Master Stateroom (Sistership)
Galley (Sistership)
Sundeck (Sistership)
Side Deck (Sistership)
Jacuzzi (Sistership)
Stern (Sistership)
General Arrangement